MS PIPE MANUFACTURER IN MAHARASHTRA गुजरात, भारत से निर्माता, निर्यातक और आपूर्तिकर्ता

जांच भेजें

Request To Call Back

Price 50000 आईएनआर/ Ton

मूल्य/उद्धरण प्राप्त करें

MOQ : 5 MTS Tons

Specification

कनेक्शन
WELDED

उपयोग
Mechanical & Industrial Equipment

शेप
ROUND

फिटिंग्स
, , , , , ,

सहनशीलता
Light Series: –8% of nominal thickness – Medium & Heavy Series: –10% of nominal thickness – Maximum: not limited above nominal thickness.

मटेरियल

सतह की फ़िनिश

पोर्ट का आकार
Nominal Bore / Port Size Approx Internal Use 1/8″ (3 mm) Very small connections 1/4″ (6 mm) Small fittings/piping 3/8″ (10 mm) Low-flow branch lines 1/2″ (15 mm) Small water or air lines 3/4″ (20 mm) Plumbing & HVAC 1″ (25 mm) Standard pipe service 1¼″ (32 mm) Bigger branch lines 1½″ (40 mm) Larger pipes 2″ (50 mm) Main lines in plumbing 2½″ (65 mm) Larger fluid systems 3″ (80 mm) Industrial pipeline 4″ (100 mm) Big mains and process lines 5″ (125 mm) Even larger pipelines 6″ (150 mm) Heavy industrial pipes

एप्लीकेशन
Industrial & Mechanical Uses,Construction & Structural Use,Water Supply & Plumbing,Fire Protection Systems,

अनुभाग आकार

काम का दबाव
Pipe Size Approx. Working Pressure 1/2″ ~70 bar (≈1,030 psi) 3/4″ ~68 bar (≈990 psi) 1″ ~58 bar (≈840 psi) 1 1/2″ ~59 bar (≈860 psi) 2″ ~52 bar (≈750 psi) 3″ ~48 bar (≈700 psi) 4″ ~50 bar (≈730 psi)

संक्षारण प्रतिरोधी
Mueller Industries 566‑240Hc 1.25 X 24 In. Galvanized Pipe ✔ Standard galvanized steel pipe with corrosion protection from zinc coating. ✔ Good choice for water, outdoor plumbing, or structural use where rust resistance matters.

कनेक्शन का प्रकार
WELDED

थ्रेड टाइप
NPTF (National Pipe Taper Fuel): A dry‑seal version of NPT designed to seal without sealants (for critical fluid systems). UN/UNF or Metric Threads: Used more in mechanical assemblies or where metric standards are specified — rarely used for standard pipe fluid systems. NPS (National Pipe Straight): Straight thread (non‑taper) for couplings.

पाइप का प्रकार
ROUND PIPE

सामग्री ग्रेड
API 5 L

दबाव रेटिंग
Nominal Pipe Size Pressure Rating (Approx) 1/2″ ~1030 psi (~71 bar) 3/4″ ~990 psi (~68 bar) 1″ ~840 psi (~58 bar) 1 1/4″ ~840 psi (~58 bar) 1 1/2″ ~860 psi (~59 bar) 2″ ~750 psi (~52 bar) 3″ ~700 psi (~48 bar) 4″ ~730 psi (~50 bar)

व्यास
इंच (इंच)

क्षमता
½″ pipe: ~23 SCFM at 40 psig 1″ pipe: ~62 SCFM at 40 psig 2″ pipe: ~385 SCFM at 40 psig

विशेषताएँ
🧱 1. Low Carbon Composition MS pipes are made from mild steel with low carbon content (typically 0.05%–0.25%), which gives them good ductility, flexibility, and ease of fabrication.,💪 2. High Strength & Durability They offer excellent mechanical strength and durability, suitable for structural support and conveying fluids under pressure. MS pipes can withstand significant loads and stresses

अंतिम प्रकार
End Type Description Typical Use Plain End Flat cut, straight end Welding or slip‑on flange Threaded End Screw threads on pipe end Threaded couplings/fittings Beveled End Angled cut for welding Butt‑weld connections Flanged End Flange attached/welded Bolted flange connections Grooved End Grooved for couplings Quick mechanical join Squared End Simple cut Custom fabrication

आयाम (एल* डब्ल्यू* एच)
इंच (इंच)

प्रॉडक्ट टाइप

मोटाई
मिलीमीटर (mm)

टाइप करें

तकनीक

सतह का उपचार

मिश्र धातु या नहीं

स्टैण्डर्ड

ग्रेड
API 5 L

बाहरी व्यास
इंच (इंच)

साइज
4 INCH TO 100 INCH

लम्बाई
मीटर (m)

Trade Information

Minimum Order Quantity
5 MTS Tons

एफओबी पोर्ट
NAHVA SHEVA

भुगतान की शर्तें
, , , , , , , , , , ,

आपूर्ति की क्षमता
प्रति सप्ताह

डिलीवरी का समय
दिन

नमूना उपलब्ध
Yes

नमूना नीति

पैकेजिंग का विवरण
LOOSE

मुख्य निर्यात बाजार
, , , , , , , ,

मुख्य घरेलू बाज़ार

About

MS Pipe (Mild Steel Pipe) Product Description

MS Pipe and similar mild steel piping products are high-quality Mild Steel (MS) Pipes manufactured from low-carbon steel known for strength, weldability, and versatility. MS Pipes are used extensively across construction, industrial, mechanical, and infrastructure applications due to their robust performance and cost-effectiveness.

Material & Construction

Material: Mild Steel (Low Carbon Steel; carbon 0.25%) offering a good balance of strength and ductility.
Manufacturing Types:
- Seamless Pipes: Made from solid billets with no weld seam, providing higher pressure resistance.
ERW/Welded Pipes: Steel strips are rolled and electrically welded for consistent quality and economy.

Surface Finish: Black (as rolled), galvanized, or coated for improved corrosion resistance.