LARGE DIAMETER PIPE MANUFACTURER IN MAHARASHTRA

Send Inquiry

Request To Call Back

LARGE DIAMETER PIPE MANUFACTURER IN MAHARASHTRA

Name: LARGE DIAMETER PIPE MANUFACTURER IN MAHARASHTRA
Brand: SIHORWALA STEEL TRADERS
Price: 50000.0 INR
Availability: InStock

Price 50000.0 INR/ Ton

Get a Price/Quote

MOQ : 10 Tons

LARGE DIAMETER PIPE MANUFACTURER IN MAHARASHTRA Specification

Shape
ROUND

Port Size
Nominal Bore / Port Size Approx Internal Use 1/8 (3 mm) Very small connections 1/4 (6 mm) Small fittings/piping 3/8 (10 mm) Low-flow branch lines 1/2 (15 mm) Small water or air lines 3/4 (20 mm) Plumbing & HVAC 1 (25 mm) Standard pipe service 1 (32 mm) Bigger branch lines 1 (40 mm) Larger pipes 2 (50 mm) Main lines in plumbing 2 (65 mm) Larger fluid systems 3 (80 mm) Industrial pipeline 4 (100 mm) Big mains and process lines 5 (125 mm) Even larger pipelines 6 (150 mm) Heavy industrial pipes

Working Presssure
Pipe Size Approx. Working Pressure 1/2 ~70 bar ( 1,030 psi) 3/4 ~68 bar ( 990 psi) 1 ~58 bar ( 840 psi) 1 1/2 ~59 bar ( 860 psi) 2 ~52 bar ( 750 psi) 3 ~48 bar ( 700 psi) 4 ~50 bar ( 730 psi)

End Type
ROUND END

Product Type
Welded Steel Pipes

Features
1. Low Carbon Composition MS pipes are made from mild steel with low carbon content (typically 0.05% 0.25%), which gives them good ductility, flexibility, and ease of fabrication., 2. High Strength & Durability They offer excellent mechanical strength and durability, suitable for structural support and conveying fluids under pressure. MS pipes can withstand significant loads and stresses

Diameter
36 INCH TO 100 INCH Inch (in)

Corrosion Resistant
Mueller Industries 566 240Hc 1.25 X 24 In. Galvanized Pipe Standard galvanized steel pipe with corrosion protection from zinc coating. Good choice for water, outdoor plumbing, or structural use where rust resistance matters.

Thread Type
NPTF (National Pipe Taper Fuel): A dry seal version of NPT designed to seal without sealants (for critical fluid systems). UN/UNF or Metric Threads: Used more in mechanical assemblies or where metric standards are specified rarely used for standard pipe fluid systems. NPS (National Pipe Straight): Straight thread (non taper) for couplings.

Capacity
pipe: ~23 SCFM at 40 psig 1 pipe: ~62 SCFM at 40 psig 2 pipe: ~385 SCFM at 40 psig Ton

Material Grade
ASTM A53 Grade A/B

Usage
Mechanical & Industrial Equipment

Material
WELDED PIPE

Application
Water and Sewage Transport: Used in municipal pipelines for water supply and drainage systems. Oil and Gas Pipelines: Suitable for low-pressure oil, gas, and steam pipelines (with appropriate standards like API 5L). Chemical and Process Piping: Used in factories for transferring fluids and gases. Firefighting Systems: Common in fire sprinkler systems and water lines.

Tolerance
Light Series: 8% of nominal thickness Medium & Heavy Series: 10% of nominal thickness Maximum: not limited above nominal thickness Inch

Connection
Welding

Surface Finish
BARE

Connection Type
WELDED

Pipe Type
WELDED PIPE

Pressure Ratings
Nominal Pipe Size Pressure Rating (Approx) 1/2 ~1030 psi (~71 bar) 3/4 ~990 psi (~68 bar) 1 ~840 psi (~58 bar) 1 1/4 ~840 psi (~58 bar) 1 1/2 ~860 psi (~59 bar) 2 ~750 psi (~52 bar) 3 ~700 psi (~48 bar) 4 ~730 psi (~50 bar)

Dimension (L*W*H)
36 INCH TO 100 INCH Inch (in)

Section Shape
Round

Standard
ASTM

Technique
Hot Rolled

Surface Treatment
Bared

Alloy or Not
Non-Alloy

Outer Diameter
36 INCH 100 INCH Inch (in)

Thickness
6 MM TO 20 MM Millimeter (mm)

Size
36 INCH TO 100 INCH

Length
5 TO 6 METER 10 TO 12 METER Meter (m)

Warranty
NO WARRANTY

LARGE DIAMETER PIPE MANUFACTURER IN MAHARASHTRA Trade Information

Minimum Order Quantity
10 Tons

FOB Port
NAVHASHEVA

Payment Terms
Paypal, Cash Against Delivery (CAD), Cash on Delivery (COD), Cash Advance (CA), Cash in Advance (CID), Cheque, Days after Acceptance (DA), Delivery Point (DP), Letter of Credit at Sight (Sight L/C), Telegraphic Transfer (T/T), Western Union, Letter of Credit (L/C)

Supply Ability
500 Tons Per Week

Delivery Time
3 Days

Sample Available
No

Sample Policy
Free samples are available

Packaging Details
LOOSE

Main Export Market(s)
Western Europe, Middle East, Africa, Asia, North America, South America, Eastern Europe

About LARGE DIAMETER PIPE MANUFACTURER IN MAHARASHTRA

Large diameter pipes are steel or other material pipes with very wide outside diameters, typically above about 350 500mm (14 20inches) and up to several metres, designed to carry large volumes of fluid, gas, or material over long distances in major infrastructure and industrial systems. These pipes include LSAW (longitudinal submerged arc welded), SSAW (spiral welded), ERW (high frequency welded), and even seamless varieties when applicable, and are engineered for high strength, pressure resistance, flow capacity, and durability in demanding environments such as oil & gas transmission networks, water supply and sewage trunk mains, chemical transport pipelines, and large structural or foundation applications. Due to their size and load bearing capability, large diameter pipes are essential in projects such as long distance pipeline networks, municipal and industrial water systems, buried and above ground infrastructure, bridge and marine construction, and even pile foundation casings in heavy civil works. Their manufacturing and material standards ensure uniform dimensions, consistent mechanical properties, and often include protective coatings (e.g., epoxy, 3PE, or polyethylene) to enhance corrosion resistance and service life under harsh soil and environmental conditions. In many engineering practices, the classification of "large diameter starts around 16 to 20inches OD (approximately 406mm 508mm), but in advanced projects, some pipes can be as large as 2,500mm (100inches) or more to meet specific flow and structural requirements. These pipes are critical in modern infrastructure because they combine high capacity, structural integrity, and long term reliability supporting essential energy, water, and industrial systems worldwide.

Robust Construction and Material Quality

Crafted from ASTM A53 Grade A/B carbon steel, our large diameter pipes feature low carbon content, ensuring exceptional flexibility and durability. These pipes are hot-rolled and welded, making them suitable for structural and fluid transport applications. The use of galvanized coating enhances corrosion resistance, providing reliability for outdoor plumbing and municipal infrastructure.

Versatile Applications and Customization

Our large diameter pipes can be used in a variety of sectors, including construction, oil and gas pipelines, water supply and drainage, chemical and process piping, and firefighting systems. Available in multiple diameters (36-100 inches), thicknesses (6-20 mm), and lengths (up to 12 meters), they can be tailored to project-specific requirements, ensuring seamless integration and optimal performance.

FAQ's of LARGE DIAMETER PIPE MANUFACTURER IN MAHARASHTRA:

Q: How are large diameter pipes manufactured for industrial use?

A: Large diameter pipes are typically produced using a hot-rolled and welded technique, ensuring a strong, seamless body. The process involves shaping and welding carbon steel, followed by treatments like galvanizing for enhanced corrosion protection. Each pipe undergoes quality checks to meet ASTM and industry standards.

Q: What applications are best suited for these pipes?

A: These pipes are ideal for municipal water and sewage transport, oil and gas pipelines, chemical process industries, firefighting systems, mechanical equipment, and structural uses. Their high mechanical strength and large size make them suitable for both pressure fluid conveyance and structural support.

Q: When should I use NPTF, UN/UNF, or NPS thread types?

A: NPTF threads are recommended when a leak-free dry seal is critical for fluid systems. UN/UNF or metric threads are more common in mechanical assemblies, while NPS straight threads are selected for coupling applications where taper is unnecessary. Choice depends on the specific application's connection and sealing requirements.

Q: Where can these pipes be installed?

A: These large diameter pipes are suitable for installation in a variety of settings, including municipal water systems, industrial plants, oil and gas networks, and large-scale construction projects throughout Maharashtra and beyond. Their corrosion resistance also permits outdoor and underground deployment.

Q: What are the key benefits of using mild steel large diameter pipes?

A: Mild steel pipes offer excellent ductility, ease of fabrication, high mechanical strength, and durability under pressure. With galvanized options, they provide reliable corrosion protection, making them a cost-effective and versatile solution for demanding infrastructure and industrial applications.

Q: How do I ensure the correct pipe size and pressure rating for my project?

A: Select pipe diameter, thickness, and thread type based on your system's fluid flow, pressure requirements, and connection standards. Consult the provided pressure ratings and internal bore sizes to match application needs. For precise guidance, our experts can help recommend the right specification according to your project's standards.

Tell us about your requirement